High Pressure, Plural Component, Direct Impingement Mix, Mechanical Purge
The Gun for bigger jobs. Same simple operation, setup, and maintenance as the MG gun, the BD gun is used when very controllable high output is desired.
TECHNICAL INFORMATION
Features
- Simple operation, easy set-up and maintenance
- Versatile – Sprays Polyurea Coatings, Urethane, and Spray Foams
- Inexpensive to service, industries lowest rebuild cost
- Less than 5 minute clean up at the end of the day
- Requires 3 minutes to change PCD
- Will dispense materials at 1:1 through 4:1 ratios
- Round Spray Pattern, Variable Flow rates from 1 lb/min to 40 lbs/min
- Excellent Mix
- Lowest Cost Mix Package (pattern control disc mix module)
- Adapter blocks and fittings to connect to any make of proportioner
- Coupling Block with material shut-off valves allows leakage free disconnect from gun
- Extremely flexible 24” whip hose assembly
- Valving Rod & PCD require no adjustment
- Rebuild-able check valves
Applications
- Shipboard / Offshore
- Refinery / Pipe / Tank
- Bridge / Architectural
- Truck Bed Liners
- Automotive Ground Effects
- Secondary containment
- In Mold Coatings, Scenic Theaming and Fabrication for the Theme & Prop Industry
- Foam Insulation and Roofing
- EPS hard-coating
Specifications
- Introduced in 2007
- High Pressure, Plural Component, Direct Impingement Mixing, Mechanical Purge
- Minimum Material Output: 1lb./min (.4536 kg)
- Maximum Material Output: 40 lbs./min (18.14 kg)
- Small Size:
- Height: 6 3/4” (17.15 cm)
- Width: 2 5/8” (6.67 cm)
- Length: 4 1/4” (10.80 cm)
- Weight: 2.5Lbs. (1.13 kg)
- Air Requirement: 80-130 PSI (0.56 – 0.9 MPa, 5.6 – 9.0 bar)
- Maximum Fluid Temperature: 200°F (94°C)
- Maximum Fluid Working Pressure: 3500 psi (24.5 MPa, 245 bar)
Contact Us
Our company is built on the principles of manufacturing and providing quality products and dependable service. If you have any questions about our products or services, please contact us.